Sensitivity of a disc rupture strength test to air bubble pores in phosphate-bonded investment materials at elevated temperatures

A S Juszczyk, D R Radford, R V Curtis

Research output: Contribution to journalArticlepeer-review

10 Citations (Scopus)


Objectives: To investigate the sensitivity of a modified disc rupture test to variables affecting the strength of four phosphate-bonded investment materials under conditions closely resembling the in-service environment. This study examined the influence of air bubble pores on the strength of phosphate bonded investment materials at a temperature of 900degreesC. Method: A modified disc rupture configuration was used to test a circular investment diaphragm with clamped edges, in tension, initiated by bending. A sequentially-varying molten metal mass was used to apply the load using an electronic centrifugal casting machine. The staircase method was used to determine the increase or decrease of the applied load with the standardized increment of load being no greater than 1 or 2 g. The mean load applied to 30 samples defined the transition of survival to failure of the investment disc and was taken as a measurement of investment strength. Two material handling techniques, one giving virtually no pores and one showing a wide pore size distribution were used. Results: The diaphragm clearly either failed or survived the test with the pattern of fracture indicating brittle failure. A statistically significant difference in strength (P <0.050) of diaphragms with and without air bubble pores was demonstrated for three materials. Fewer pores resulted in increased strength of those materials and produced a much reduced scatter of strength in the fourth. Significance: The modified disc rupture test is sufficiently sensitive to identify variations in strength of phosphate bonded investment materials caused by differing pore size distributions. (C) 2002 Academy of Dental Materials. Published by Elsevier Science Ltd. All rights reserved.
Original languageEnglish
Pages (from-to)255 - 262
Number of pages8
JournalDental Materials
Issue number3
Publication statusPublished - May 2002


Dive into the research topics of 'Sensitivity of a disc rupture strength test to air bubble pores in phosphate-bonded investment materials at elevated temperatures'. Together they form a unique fingerprint.

Cite this